Working area X= 4300 mm, Y= 2160 mm, Z= 105 mm. Vertical drilling unit. 8 position tool changer. Allows: cutting panels, milling, nesting, drilling, engraving, cutting foam.
CNC NESTING WORKING CENTRE PROFIT H10 22.43 FORMAT-4: allows panel cutting, drilling and milling in any shape desired, all in one process.
Nesting table: working areaX= 4300 mm, Y= 2160 mm, Z= 105 mm
Quick and easy positioning of the vacuum pods, suitable for every workpiece size: The matrix geometry of the matrix table makes handling and positioning the vacuum pods easy. Additionally a distributor can be used, to establish a dual-circuit vacuum system.
Tool change: The linear tool changer ensures a rapid tool change and minimises the compressed air consumption. This enables the use of aggregates that have larger tool diameters for increased performance of your profit H10. Up to 36 tool and aggregate positions are available.
Drilling head: Regardless whether the machine will only be used for cabinet manufacturing or as an all-rounder. You decide which drill-head configuration is the right one for you. Choose between, a head with only vertical drilling spindles or spindles with a grooving saw for vertical and horizontal processing.
Length measurement system: Setting the parametres of your tools made easy: every tool length is stored in the tool database accurately to one hundredth of a millimetre.
Doors: The C-axis enables highest flexibility and the optional use of units. Complete processing of doors in the shortest processing time is possible.
Chip deflector: The interpolating rotary motion of the chipping deflector is controlled via the C-axis. Thus, the resulting chippings are guided in the direction of the extraction channel, especially with processing edges.
Cutting foam: The large Z-direction stroke enables the use of special units. Any type of foam up to 80 mm can be processed in highest quality.
Lamello: By using the 5-motionplus units, manual angle settings are a thing of the past. Tools, such as the Lamello spindle moulder tool can be used.
Template: Using the template connections on the left or right sides of the matrix table, you can extend your application spectrum. The template connections ensure maximum vacuum performance, even with small contours.
3D-Milling machine: Simplest 3-axis application with impressive results. There is no limit to your creativity.
Edge processing: Block vacuum pads for edge milling on the bottom side of the tool. The horizontal drilling unit can be used without limit.
Engraving: Your future field of application is not only limited to wood. Special equipment features also allow the processing of Alucobond.
Screw taps: Metric threads or fine threads. Simple programming - perfect results
To request information about this product, you can do so in the following ways.