EDGEBANDERS TEMPORA F400 45.03 FORMAT-4 OFFER

EDGEBANDERS TEMPORAF400 45.03 FORMAT-4

Individual finishing unit options to suit the customer's requirements.

• Multi-functional trimming unit.
• “Quick-Set-System” for quick adjustment to different materials.
• Control panel with LCD display and keypad.

TECHNICAL DATA

Electrical setup

• 3x 400 V.
• 50 Hz.

Working dimensions

• Edge thickness min–max. (mm): 0,4-3,0.
• Work piece thickness min–max. (mm): 8-45
• Min. workpiece width (mm): 70
• Min. workpiece length (mm): 140

Units

• Coiled edge band feed support plate.
• Edge feeding is automatic for edge materials with a thickness of 0.4–3 mm, strip glue in separate feed.
• Guillotine shears for cutting coiled edge bands up to 3 mm in thickness.
• Glue unit for glue granulate from the teflon coated glue pot (~ 250lfm per 1kg granules on a 19mm plate).
• Pressing unit is mechanically pre-stressed, 1 straight pressure roller and 2 conic additional pressure rollers, adjustment by means of an edge portion.
• Cross-cut saw unit, 12,000 rpm, 0.75 kW.
• Multifunctional milling unit, 12,000 rpm, 0.75 kW, radius milling, flush milling, chamfer milling for thin edges, adjustment by means of edge section.
• Tooling for 2 mm radius.

Operation

• Operating panel with LCD display and keypad.

Through feed

• Workpiece chain feeder.
• 9 m/min feed speed (~ 300lfm/h).
• Extensible workpiece support.

Subject to prior sale. Characteristics for information only. The technical details are not legally binding. Contact us for further information.