EDGEBANDER MACHINE G 500 FELDER

EDGEBANDER MACHINE G 500 FELDER

• Individual finishing unit options to suit the customer's requirements.
• Multi-functional trimming unit.
• “Quick-Set-System” for quick adjustment to different materials.
• Control panel with LCD display and keypad.

TECHNICAL DATA

Electrical setup

• 3x 400 V.
• 50 Hz.

Working dimensions

• Edge thickness min–max. (mm): 0,4-5,0(8).
• Work piece thickness min–max. (mm): 8-60
• Min. workpiece width (mm): 70
• Min. workpiece length (mm): 140

Units

• Coiled edge band feed support plate Ø 800 mm, for PVC/ABS.
• Edge feeding is automatic for edge materials with a thickness of 0.4–6 mm, strip glue in separate feed.
• Guillotine shears for cutting coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS.
• Glue unit for glue granulate from the teflon coated glue pot (~ 250lfm per 1kg granules on a 19mm plate).
• Pressing unit is mechanically pre-stressed, 1 straight pressure roller and 2 conic additional pressure rollers, adjustment by means of an edge portion.
• Cross-cut saw unit, 12,000 rpm, 0.27 kW, HW saw blades Z 24, Ø 100 mm, 45° working angle; cutter capping 0°/20° manual.
• Multifunctional milling unit, 12,000 rpm, 0.50 kW, radius milling, flush milling, chamfer milling for thin edges, adjustment by means of edge section.
• Tooling for 2 mm radius.

Operation

• Operating panel with LCD display and keypad.

Through feed

• Workpiece chain feeder.
• 11 m/min feed speed (~ 420lfm/h).
• Extensible workpiece support.

General

• Extraction connector Ø in mm: 120
• Weight kg (with standard configuration): 750
• Length in mm: 3200