WIDE BELT SANDER FINISH 1352 modular FORMAT-4

The WIDE BELT SANDER FINISH 1352 modular FORMAT-4 has a sanding height of 3-170mm, a sanding width of 1350mm. The speed of advance is adjustable continuously: 2.8-20 m / min. It has configurable modular units with contact roller units, brushing unit, sanding pad unit or combined sanding unit. Possibility of touch screen in optional.

More details

FINISH 1352 modular FORMAT-4
New machinery
 
Technical description

WIDE BELT SANDER FINISH 1352 modular FORMAT-4

The new finish 1352 modular and 1353 modular wide belt sanders impress through exceptional flexibility. Either as a 2 or 3 belt machine – you can decide the individual equipment and configuration of the processing units. The free aggregate configuration option enables the optimal adaption to your requirements which ensures maximum efficiency and maximum time saving.

TECHNICAL DATA

Electrics

  • 3x 400 V motor voltage, 50 Hz motor frequency.
  • Star-delta start.
  • CE safety regulations.

Feeder table

  • Electrical height control of the feed table incl. fine-adjustment control from the control panel
  • Invertor controlled variable feed speed from 2.8–20 m/min adjustable from the control panel
  • Hand guard and over-thicknessing protection for the workpiece
  • Endless manufactured conveyor belt with honeycomb structure
  • Automatic centring of the feeding belt

Control systems

  • Manual control panel
  • Ammeter for monitoring the electrical load on the units

Contact-roller unit

  • Rubber, grooved contact roller with 85° shore and 180 mm diameter
  • Manual grain compensation
  • Mechanically pre-stressed rubber pressure rollers
  • Sanding belt is oscillated electro-pneumatically
  • Electronic run-off protection for the sanding belt
  • Cutting speed 18 m/sec
  • Sanding belt 1370 x 2200 (width x length)

Contact-roller unit

  • Rubber, grooved contact roller with 45° shore and 180 mm diameter
  • Manual grain compensation
  • Mechanically pre-stressed rubber pressure rollers
  • Sanding belt is oscillated electro-pneumatically
  • Electronic run-off protection for the sanding belt
  • Cutting speed 18 m/sec
  • Sanding belt 1370 x 2200 (width x length)

Sanding cushion

  • Synchronisation with any feed speed pf the EP sanding shoe

Engines

  • 1 x 11 kW (15 PS) motor with automatic Star Delta start

General

  • Sanding width 1350 mm.
  • Sanding height 3–170 mm.
  • Minimum workpiece length contact roller aggregate (mm): 220
  • Minimum workpiece length combination super finish aggregate (mm): 370
  • Extraction connection Ø in mm: 2x 200
  • Min. air pressure (bar): 6
  • Dimensions mm (L x W x H): 2540 x 2050 x 2020
  • Weight, kg (with average equipment): 2300
  • Total power requirement without additional options: 13 kW.

Characteristics for information only. The technical details are not legally binding. Contact us for further information.

 
WIDE BELT SANDER FINISH 1352 modular FORMAT-4 VIDEO

 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

16 products in the same category: