WIDE BELT SANDER FINISH 1350 CLASSIC FORMAT-4

WIDE BELT SANDER FINISH 1350 CLASSIC FORMAT-4

FORMAT-4 wide belt sanders are renowned for their solid construction, high quality system components and excellent results. The premium model series “finish” will now be expanded to include two additional wide belt sanders: “finish 1350 classic” and “finish 1350 classic gloss”.

The new machines convince with maximum processing dimensions combined with the brand new super finish unit with chevron belt and electro-pneumatic segmented sanding pad as well as touch screen control. Five different sanding units and numerous individual optional extras allow optimum machine configuration for any challenge a modern workshop could face.

TECHNICAL DATA

Electrics

• 3x 400 V motor voltage, 50 Hz motor frequency.
• Star-delta start.
• CE safety regulations.

Feeder table

• Constant insertion height - fixed table, 900 mm
• Electrical control of the height of the feeding table, includes fine adjustment from the control screen
• Variable feed speed from 2.8 to 20 m / min adjustable through the inverter from the control panel
• Hand protection and safety against excessive loss of material
• Recognition sensor with 25 segments, segment width: 55 mm
• Conveyor belt with hexagonal honeycomb design
• Automatic centering of the feeding mat

Control systems

• Control unit with 7 "color touch screen
• Memory program for 100 cuts available
• Meldung bei erreichen der Wartungsintervalle
• Error messages through clear texts
• Ammeter with control of aggregate loads

1. Contact-roller unit

• Electromotorized adjustment of position to compensate the granulometry in 1/100 mm from the control screen.
• Rubber pressure roller with mechanical transmission.
• Electro-pneumatic oscillation of the sanding band.
• Electronic safety of the sanding belt operation.
• 1 motor with 11 kW (15 HP) incl. Automatic star-triangle start
• Cutting speed: 18 m / sec.
• Sanding band 1370 x 2200 mm (width / length).

2. Contact-roller unit

• Electromotorized adjustment of position to compensate the granulometry in 1/100 mm from the control screen.
• Electro-pneumatic skid ESC with segmented sanding of 25 mm width, incl. rapid change system.
• Variable pressure control on the operating side
• Chevron anti-friction sliding band between the sanding pad and the sanding belt for homogeneous sections and without oscillation marks
• Rubber pressure roller with mechanical transmission
• Electro-pneumatic oscillation of the sanding belt
• Electronic safety of sanding belt operation
• 1 motor with 15 kW (20 HP) incl. automatic star-triangle start
• Cutting speed: 16 m / sec
• Sanding belt 1370 x 2200 mm (width / length)

General

• Sanding width 1350 mm.
• Sanding height 3–170 mm.
• Minimum workpiece length contact roller aggregate (mm): 220
• Minimum workpiece length combination super finish aggregate (mm): 370
• Extraction connection Ø in mm: 2x 200
• Min. air pressure (bar): 6
• Dimensions mm (L x W x H): 2540 x 2050 x 2020
• Weight, kg (with average equipment): 2800
• Total power requirement without additional options: 28 kW.

Characteristics for information only. The technical details are not legally binding. Contact us for further information.