RADIAL SAW JUNIOR 640
JUNIOR 640 MAGGI radial saw table dimensions 1580x975 mm. With Ø 400 blade: max cut width 20x545 mm, length cut 125x450 mm, max depth 125 mm, max. height of blade from table 45 mm, max cutting height at 45° 80 mm.
RADIAL SAW JUNIOR 640 MAGGI
TECHNICAL FEATURES
MAGGI radial arm saws are built with the maximum care, exploiting the best technological expedients fit for making them sure and reliable.
- The heavy cast iron structure guarantees their constant and perfect cutting precision.
- The large wooden working table allows the operator to act with the maximum ease.
- Adaptability, versatility, cutting precision, maintenance facility make this line of machines an essential equipment in daily use of each kind of joinery.
- Adjustable, soundproof blade-guard carter that guarantees a complete covering of the blade for each cutting depth. Preset for an easy replacement of the same blade.
- Sliding of the carriage/fork/motor group by means of 8 adjustable ball bearings assembled at 45 degrees on interchangeable, special steel guides.
- Blade inclination as to working table from 0 up to 45 degrees with possibility of automatic locking at the 2 ends.
- Large wooden working table and suction prearrangement.
- Radial amplitude of the arm from 0 to 45 degrees either right or left.
- IP54 electric control board with relative emergency push button.
- NEW ADJUSTABLE BLADE GUARD ensures a complete coverage of the inactive part of the saw blade at all cut depth. diameter 550 mm.
- SELF-BRAKING MOTOR and frontal switch for low tension.
- THE BLADE can be positionned from 0 to 45 degrees. Automatic locking device on both of the extremities.
- On request: automatic return device.
- On request: self-braking motor/low voltage frontal switch group.
TECHNICAL DATA
Three phase Motor Power | 4 (3) Hp (kW) |
Single phase Motor Power | 3 (2.2) Hp (kW) |
Motor Speed | 2800 r.p.m. |
Blade Diameter | Ø 400 mm |
Blade Bore Diameter | Ø 30 mm |
Shaft dimension | Ø 25x80 mm |
Dust chute diameter on blade guard | Ø 60 mm |
Rear dust chute diameter | Ø 100 mm |
Table dimensions | 1580x975 mm |
Maximum cut width Ø 400 | 20x545 mm |
Length of cut h max Ø 400 | 125x450 mm |
Maximum cut depth Ø 400 | 125 mm |
Max. height of blade from table Ø 400 | 45 mm |
Max. cutting height at 45° Ø 400 | 80 mm |
Max. cutting height arm 45° on right side | 20x380 > 125x315 mm |
Max. cutting height arm 45° on left side | 20x190 > 125x125 mm |
Net Weight | 203 Kg |
Gross Weight | 215 Kg |
Packing Dimensions | 1600x850x660 mm |
To request information about this product, you can do so in the following ways.
