RADIAL SAW BEST 960
BEST 960 MAGGI radial saw table dimensions 2000x1355 mm. With Ø 400 blade: max cut width 20x865 mm, length cut 125x770 mm, max depth 125 mm, max cutting height at 45° 80 mm, max. height of blade from table 150 mm.
RADIAL ARM SAW BEST 960 MAGGI
TECHNICAL FEATURES
MAGGI radial arm saws are built with the maximum care, exploiting the best technological expedients fit for making them sure and reliable.
- The heavy cast iron structure guarantees their constant and perfect cutting precision.
- The large wooden working table allows the operator to act with the maximum ease.
- Adaptability, versatility, cutting precision, maintenance facility make this line of machines an essential equipment in daily use of each kind of joinery.
- Adjustable, soundproof blade-guard carter that guarantees a complete covering of the blade for each cutting depth. Preset for an easy replacement of the same blade.
- Sliding of the carriage/fork/motor group by means of 8 adjustable ball bearings assembled at 45 degrees on interchangeable, special steel guides.
- Blade inclination as to working table from 0 up to 45 degrees with possibility of automatic locking at the 2 ends.
- Large wooden working table and suction prearrangement.
- Radial amplitude of the arm from 0 to 45 degrees either right or left.
- IP54 electric control board with relative emergency push button.
- NEW ADJUSTABLE BLADE GUARD ensures a complete coverage of the inactive part of the saw blade at all cut depth. diameter 550 mm.
- SELF-BRAKING MOTOR and frontal switch for low tension.
- THE BLADE can be positionned from 0 to 45 degrees. Automatic locking device on both of the extremities.
- On request: automatic return device.
- On request: self-braking motor/low voltage frontal switch group.
TECHNICAL DATA
Three phase Motor Power | 4 (3) Hp (kW) |
Single phase Motor Power | 3 (2.2) Hp (kW) |
Motor Speed | 2800 r.p.m. |
Diameter of blade | Ø 400 mm |
Blade Bore Diameter | Ø 30 mm |
Shaft dimension | Ø 25x80 mm |
Dust chute diameter on blade guard | Ø 60 mm |
Rear dust chute diameter | Ø 100 mm |
Table dimensions | 2000x1355 mm |
Maximum cut width Ø 400 | 20x865 mm |
Length of cut h max Ø 400 | 125x770 mm |
Maximum cut depth Ø 400 | 125 mm |
Max. height of blade from table Ø 400 | 150 mm |
Max. cutting heght at 45° Ø 400 | 80 mm |
Max. cutting height arm 45° on right side | 20x615 > 125x565 mm |
Max. cutting height arm 45° on left side | 20x425 > 125x350 mm |
Net Weight | 294 Kg |
Gross Weight | 306 Kg |
Packing Dimensions | 2000x1000x670 mm |
To request information about this product, you can do so in the following ways.
