BANDSAW N3800 HAMMER
The BANDSAW N3800 HAMMER has a cutting height of 310mm, cutting width 360mm and some wheels of 380mm diameter. The dimensions of the table is 400 x 510 mm. It has as optional the X-Life®, guides of the ceramic band saw. The cutting speed is 1200 m/min.
BANDSAW N3800 HAMMER
The N3800 model carries the tape guides on the upper and lower table, the tape tension indicator and tilt table. So that the change of the tape is simple and as fast as possible it has a tension indicator to adjust it correctly. You can incorporate as optional an miter rule from -45º to + 45º.
TECHNICAL DATA
Electrical Setup
- 3x400 V.
- 50 Hz motor frecuency.
- Motor 2.0 HP (1.5KW).
Unit
- Cutting height in mm: 310
- Cutting width in mm: 360
- Flywheel-Ø in mm: 380
- Fly-wheel speed (rpm): 1000
- Cutting speed in m/sec: 20
- Blade length in mm: 3556
- Blade width in mm: 6–20
General
- Table size in mm: 400 X 510
- Working height in mm: 840
- Tiltable table: -5°–+45°
- Dust port Ø in mm: 1x 120
- Total height in mm: 1750
- Weight in kg: 150
Characteristics for information only. The technical details are not legally binding. Contact us for further information.
To request information about this product, you can do so in the following ways.
