VACUUM PANEL LIFTER V-MOTION 25.90 st FORMAT-4

The VACUUM PANEL LIFTER V-MOTION 25.90 st FORMAT-4 has an ergonomic system for easy transport of panels both horizontally and vertically, vacuum generator through the ejector for a strong vacuum at a relatively low flow for the handling of permeable materials. Comfortable control in single-person operation and tilt function from 0-90 °. Suitable for loads up to 250 kg.

More details

VACIO V-MOTION 25.90 st FORMAT-4
New machinery
 
Technical description

VACUUM PANEL LIFTER V-MOTION 25.90 st FORMAT-4

The vacuum lifter v-motion 15.90st facilitates the transport of almost all panel materials within the workshop and is also suitable for permeable materials. Panels up to 250 kg can be transported both vertically and horizontally. The pneumatic tilting function from 0-90° enables flexible application for all requirements.

Two suction cups are attached on a longitudinal crossbar. To lift permeable materials (MDF over 8mm thickness) a reinforced vacuum ejector is installed.

All the operating elements for the hoist and for the vacuum lifter are housed in a common control unit. This makes operation of the system and guiding of the material possible with one hand. The comfort control enables the smooth lifting and lowering of the panel using a frequency converter. The integrated safety function protects against unintentional release of the panel.

TECHNICAL DATA

  • With pneumatic tilting function for horizontal or vertical base position;
  • Max. load: 250 kg; T
  • he panels need to be suitable for lifting with vacuum equipment (also MDF with a thickness of over 8 mm) Lifting speed Chain hoist: continuously 0-10 m/min. Lifting height 2,0 m, operating pressure: 7 bar filtered compressed air required;
  • Operated using comfort control. All operating elements for the hoist and for the vacuum lifter are housed in a common control unit.
  • Vacuum traverse - reinforced: 1 pc. longitudinal traverse (1.25 m) 2 adjustable 500mm x 250mm oval suction cup.
  • Safety function protects against unintentional release of the panel due to incorrect operation.

Characteristics for information only. The technical details are not legally binding. Contact us for further information.

 
VACUUM PANEL LIFTER V-MOTION 25.90 st FORMAT-4 VIDEO

 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

8 products in the same category: