VACUUM PANEL LIFTER V-MOTION 15.00 FORMAT-4
The VACUUM PANEL LIFTER V-MOTION 15.00 FORMAT-4allows the transport of boards horizontally and vertically. Loads of up to 150Kg. Vacuum generator through an ejector for a strong vacuum with a relatively low volume flow. Comfort of management in a company with only one employee. Available with column crane, wall crane or guide system.
VACUUM PANEL LIFTER V-MOTION 15.00 FORMAT4
The vacuum lifter v-motion 15.00 facilitates the transport of almost all panel materials within the workshop and is also suitable for permeable materials. Panels up to 150 kg can be transported both vertically and horizontally.
All the operating elements for the hoist and for the vacuum lifter are housed in a common control unit. This makes operation of the system and guiding of the material possible with one hand. The comfort control enables the smooth lifting and lowering of the panel using a frequency converter. The integrated safety function protects against unintentional release of the panel.
TECHNICAL DATA
- Function for horizontal or vertical base position; Max. load: 150 kg;
- The panels need to be suitable for lifting with vacuum equipment.
- Lifting speed Chain hoist: continuously 0-10 m/min. Lifting height 2.0 m, operating pressure: 6 bar filtered compressed air required;
- Operated using comfort control. All operating elements for the hoist and for the vacuum lifter are housed in a common control unit.
- Vacuum traverse: 1 pc. longitudinal traverse (1.5 m) 2 adjustable suction cups D = 270mm Safety function protects against unintentional release of the panel due to incorrect operation.
- The static inspection is the customer responsibility and has to be checked by the customer.
To request information about this product, you can do so in the following ways.
