SPINDLE MOULDER profil 95 M e-motion FORMAT-4

SPINDLE MOULDER profil 95 M e-motion FORMAT-4

The 95M e-motion profil tupi from Format-4 is the highest model in the Format-4 range with maximum ease of use and guaranteeing absolute efficiency through minimum configuration times. The advanced electric spindle has an HSK 63F interface for a quick tool change system with pneumatic clamping. The rotation range of ± 46 ° allows an unlimited variety of processing. With the self-explanatory e-motion control on the 15 "touch screen control panel, the speed, height and angle of the spindle, as well as the milling stop and even the opening of the table can be adjusted intuitively and Precise memory locations for tools, spindles and milling programs allow perfect repeatability and shorter setup times.

Controlled eccentric insertion rings ensure maximum table support surface and reduce the adjustment effort, especially when turning the spindle considerably. The new newly developed precision milling stop for heavy work has two controlled shafts for precise depth adjustment and additional positioning independent of the right jaw depth. In addition, the stop can be turned completely outside the work area for convenient access during arc milling.

STANDARD EQUIPMENT

Electric system

• Motor voltage 3x 400 V
• Motor frequency 50 Hz
• 7.5 HP (5.5 kW) S6 / 40%
• Service hours counter
• 3-phase CEE connection for auxiliary devices with delayed drive time (for example: feed device)

Milling and topping equipment

• 320 mm table opening
• Electrical tilt of the tupi shaft unit 90 ° –45 °
• Milling stop for tool Ø max. 250 mm
• Centrex milling protection
• 550 mm anodized aluminum milling stop rails

CNC positioning control

• E-motion control with touch function on control panel at eye level, USB interface and preparation for network connection. The control screen is easily adjustable over the user's entire work area and can be turned outside the area.
• Height adjustment control
• Angular adjustment control +/– 46 °
• Milling stop position adjustment

General

• Working height in mm: 890
• Transport width min. in mm: 1305
• Diameter of the suction socket in mm Milling stop / Vacuum under table: 140/80
• Weight in Kg (with medium equipment): 730

Characteristics for information only. The technical details are not legally binding. Contact us for further information.