SPINDLE MOULDER profil 45 Z X-MOTION FORMAT-4

SPINDLE MOULDER profil 45 Z X-MOTION, table opening 320mm, working height mm890, electrical moulder spindle height setting, digital display for spindle angle adjustment, “X-Roll” guiding system, control panel "x-motion": for height, angle and fence position

More details

profil 45 Z X-MOTION FORMAT-4
New machinery
 
Technical description

SPINDLE MOULDER profil 45 Z X-MOTION FORMAT-4

The 45 Z X-MOTION profil tupi from Format-4 is designed for professional carpenters, it has an adjustment of the height, of the angle of the milling axis and fixation of the stops of milling easy and fast by means of the control panel. The system of fast change of the axis guarantees times of change extremely fast and greater efficiency of the production. It incorporates a 7 "TFT screen in its" x-motion "version. The touch screen control panel is always eye level and provides all the important information at a glance.

In this model the axis is tiltable.

STANDARD EQUIPMENT

Electrical setup

  • 3x 400 V motor voltage
  • 50 Hz motor frequency
  • 7,5 HP (5,5 kW) S6 / 40%
  • 5 positions at 3500/4500/6000/8000/10,000 rpm
  • Star-delta start
  • Forward and Reverse Run
  • Timer for operating hours

Spindle Moulder Unit and Spindle Fence

  • Table opening 320 mm
  • Electric moulder spindle tilt 90°–45°
  • Electrical moulder spindle height setting
  • Control panel at eye level with "x-motion" control for the height, angle and fence position
  • Moulder spindle Ø 30 mm, usable height from table 140 mm
  • Manual spindle locking mechanism
  • Moulder fence 250 for max. tool diameter 250 mm
  • Centrex moulder guard
  • MULTI setting system for moulder fence 250, driven by electric motor, for parallel guidance and quick-setting, with digital read-out
  • Aluminum spindle fence plates anodised 550 mm

Tenoning and slotting Tables, “X-Roll” guiding system

  • Tenoning and slotting table 1300 mm anodised

General

  • Working height in mm 890
  • Min. transport width in mm (without option 012) 935
  • Extractor connection port diameter in mm on spindle moulder fence/below table extraction 140/80
  • Weight kg (with standard configuration) 650

Characteristics for information only. The technical details are not legally binding. Contact us for further information.

 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

19 products in the same category: