HORIZONTAL BEAM SAW KAPPA AUTOMATIC CLASSIC FORMAT-4: 10CV motor, 3200mm cutting length, 320mm main saw blade, polished steel sliding carriage. The speed of advance is adjustable continuously: 1-40 m/min. It has a control panel: 15 "TFT screen, Touch screen.

More details

New machinery
Technical description

HORIZONTAL BEAM SAW KAPPA AUTOMATIC CLASSIC FORMAT-4: this horizontal panel saw with its construction and standard configuration, the largest saw from the kappa automatic series, meets the requirements of the most important factors of modern production: 

  • The automatic cutting height adjustment for the optimum saw blade entry angle and maximum saw carriage movement smoothness ensures a high-end edge finish.
  • The dual measuring system guarantees maximum repeatability.
  • The pressure bar opens in relation to the height of the material, reducing the time required to move the material and hence ensuring maximum productivity and the shortest cutting cycles.
  • An ever increasing factor in production are the energy costs. Our "Green Line package" with its controlled extraction gates and direct control of the motors can reduce energy consumption by up to 30%.
  • One of the lowest operating noise levels, helps the environment and protects the health of the operator.



  • 3x 400 V motor voltage, 50 Hz motor frequency
  • Motor power 10.0 HP (7.5 KW)

Cutting length and pressure beam

  • Cutting length 3800 mm (Material sliders 3800 mm)
  • Pressure bars are pneumatically controlled
  • Contact pressure pneumatic adjustable up to max. 3bar

Saw carriage

  • Cutting direction towards the fence
  • Continuously adjustable feed rate (1–40 m/min)
  • Return speed 40m/min
  • Main saw blade Ø 320 mm, 68 mm saw blade projection
  • 1,1 kW scoring unit with pneumatic lowering
  • Scoring unit Ø 150 mm

Work piece tables

  • Left hand table providing the right angle with air-cushion, 2300 x 600 mm
  • 2000 mm right angle fence
  • 2 additional support tables with air-cushion, 1500 x 600 mm
  • Moving device for the side tables

Material slider and stack clamp

  • Material slider working range in mm 3200
  • Number of roller tracks as a support behind the machine table 6
  • Number of panel clamps equipped with 2 fingers, opening height 80 mm 5
  • Packet clamping pressure pneumatic adjustable up to max. 3bar
  • Material slider (forward/backward motion) 25/40 m/min
  • Contact device pressure pneumatic adjustable up to max. 3bar
  • Automatic pressure device (50–1200 mm)

Machine control

  • Control panel with 15” colour touch screen

Characteristics for information only. The technical details are not legally binding. Contact us for further information.


Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

4 products in the same category: