VERTICAL PANEL SAW AUTOMATICA SVP 950A
The vertical panel saw SVP950M allows a maximum length cut of 5300 mm and a thickness of 80 mm. Manual displacement of the beam and saw carriage for horizontal and vertical cuttings.
VERTICAL PANEL SAW AUTOMATICA SVP 950A PUTSCH MENICONI
The vertical panel saw SVP950A has a welded steel frame, offers a 0,1 mm. accuracy.
Automatic displacement of the beam and saw carriage for horizontal and vertical cuttings, with two feeding speeds 12 and 24 meters per minute.
Automatic plunging and returning of saw carriage, with possibility to select the stopping at the end of the cycle or returning to the starting point.
STANDARD EQUIPMENT
- Automatic or Manual shifting frame to avoid the cutting of the plastic strips during horizontal cuts.
- Self-braking motor.
- Bottom aluminum supports with phenolic soles.
- Lift-up rollers to easily the sliding of the panels.
- N°2 Stops for vertical cuttings.
- Short piece cutting device
- Supplementary low-level stop for vertical cuttings.
- Repeat cutting devices for horizontal strips.
TECNICAL DETAILS
- Max. lenght of cut : 5300 mm
- Max. height of vertical cut: 2200 mm
- Max. height of horizontal cut: 2100 mm
- Max. depth of cut: 80 mm
- Motor power: 7’5 HP (Kw 5’6)
- Diám. Saw blade 300 mm, 5000 rpm
The model SVP 950A is available with ECO system (optional)
The ECO frame is provided with vertical channels and a dust catcher on the right side, to optimize the dust collection. This model fulfils the current rules about dust pollution, assuring less than 1 mg. per cubic meter, in the work station.
To request information about this product, you can do so in the following ways.
