SLIDING TABLE SAW K 540 S FELDER OFFER

The SLIDING TABLE SAW K 540 S FELDER has a 7,5 HP engine. The saw unit has a cutting width of 800 mm with a blade inclination of 45 to 90 degrees, a maximum cutting height. 137 mm and a X-Roll sliding carriage of 2500 mm.

More details

K 540 S FELDER OFERTA
New machinery
 
Technical description

SLIDING TABLE SAW K 540 S FELDER

The Felder K 540 S squad in its new edition with an advanced cutting unit that allows an impressive cutting height of 137 mm when using a 400 mm cutting disc. The 100 mm diameter electric incision unit can be used in combination with a Ø 300 mm cutting disc for professional productivity.

Also, the top folding protection device and the sliding carriage with "X-Roll" of 2500 mm offer professional working conditions.

TECHNICAL DATA

Electrical setup

  • 3x 400 V.
  • 50 Hz.
  • 7.5 HP (5.5 kW)*

Saw and scoring unit

  • Circular saw with disc inclination 90 ° –45 °, max. 137 mm with disc diameter of 300-400 mm, speed 4000 rpm and D-30mm shaft.
  • Cutting width 800 mm with the total length of the table.
  • Protection of circular saw superior for width of cut of 800/1250 mm, orientable from the field of work, cover for 90 ° and cover for angular cuts with adjustment of height and tilting out of the place of work, diam. saw blade 400mm.
  • Table extension for 430 x 812mm saw.
  • Circular saw stop for cylindrical guide shaft D = 40 mm with rail (Anth).
  • Incisor K 500S with 3x400V 50 Hz motor.
  • Incisor D-100 mm with main saw blade D-300 mm
  • Detachable incisor shaft for main saw blade D-400 mm
  • Sliding carriage cutting length 2500mm anodized, edging shoe, 10 Years Felder warranty ¡for "X-Roll", the guide system of the Felder format carriage.
  • Rule for flag car 2600 mm (# 160/161).
  • 1300 flag carriage, cutting length 2500-3200 mm
  • 2600mm carriage ruler with 1100/1300 flag carriage locking system

General

  • Working height in mm: 890
  • Min. transport width in mm (without option 012): 800
  • Extractor connection port diameter in mm on overhead saw guard: 80
  • Weight kg (with standard configuration): 680

Characteristics for information only. The technical details are not legally binding. Contact us for further information.

 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

30 products in the same category: