Motor power 12 HP, cutting height of 80 mm, cutting length 3200 mm, continuously adjustable feed 5-100 m/min, return speed 130 m/min, main saw blade Ø 320 mm, scoring unit Ø 150 mm

More details

New machinery
Technical description

HORIZONTAL BEAM SAW KAPPA AUTOMATIC 80.32.32 FORMAT-4: this horizontal panel saw is one of the heaviest saws in its class, the kappa automatic 80 with pressure bar and steel material slider is durable and of high quality machine construction. High-end cuts, highest precision and maximum repeatability are the results of this philosophy. With the newly developed control panel with a 24" flat screen monitor in combination with the cutting direction against the fence and a saw blade cutting height of 80 mm, the machine is one of the biggest in its class.



  • 3x 400 V motor voltage, 50 Hz motor frequency
  • Motor power 12.0 HP (9.0 KW)
  • Cutting length and pressure beam
  • Cutting length 3200 mm (Material sliders 3200 mm)
  • Pressure bars are pneumatically controlled
  • 2 pressure settings via the controls

Saw carriage

  • Cutting direction towards the fence
  • Continuously adjustable feed rate (5–100 m/min)
  • Return speed 130 m/min
  • Cutting length controlled automatically by laser sensor on saw carriage
  • Main saw blade Ø 320 mm, 80 mm saw blade projection
  • 2 cutting height adjustment settings, manual (40 mm/80 mm)
  • kW scoring unit with pneumatic lowering
  • Scoring unit Ø 150 mm
  • Saw blade quick-lock (main saw + scoring unit)

Work piece tables

  • Material slider working range in mm 3200
  • Number of roller tracks as a support behind the machine table: 9
  • Number of stack clamps with 1-finger operation, opening height 80 mm: 6
  • Material slider (forward/backward motion) 25/80 m/min
  • Automatic start from preset trimming position detected by laser sensor behind the machine table
  • Automatic pressure device (50–1200 mm)
  • Additional package clamp at position 787.50 mm to the angle stop

Machine control

  • Electonic control with a 24” TFT-screen
  • PC with Windows 7 Professional operating system
  • Operating hours counter, running meter, service intervals



  • 3x 230 V motor voltage, 60 Hz motor frequency

Saw carriage

  • Groove program operated via controls, manual groove depth adjustment

Work piece tables

  • 2 work piece tables 2300 x 600 mm instead of 1800 x 600 mm
  • Moving device with linear guides for the side tables

Material slider and stack clamp

  • Aditional package clamp at position 1147.50 mm to the angle stop

Carro de sierra

  • Ajuste electrónico de la altura de corte en continuo (con función de ranura)
  • Ajuste del incisor motorizado desde el panel de mando.

Machine control

  • Laser cut line indicator
  • Mitre cutting, operation via the controls
  • Thermo-label printer for interactive label printing, including label editor
  • Cutting optimisation software “Easy Optimizer” for the machine
  • Cutting optimisation software “Cutting Optimiser”, for the office and machine

L-motion loading system

Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

5 products in the same category: