EDGE BANDER WITH GLUE BOX ME35

EDGE BANDER WITH GLUE BOX ME35 MINIMAX

STANDARD EQUIPMENT:

• inlet control board to facilitate its use in all working conditions
• enbloc steel base to ensure stability, stiffness and adjustment maintenance
• steel upper presser with 2 offset rows of rubber pressure wheels
• high adherence toothed feeding carpet, with steel cables inside
• manual presser lifting with automatic positioning of operating groups, according to panel thickness
• numerical indicator of thickness of the selected panel
• panel support roll-way on the whole length of the machine
• dedicated aspiration of glue smokes; centralized aspiration of the remaining waste
• protection cabin
• electric installation with PLC, padlockable main switch and thermic relais
• emergency push-button

OPERATING GROUPS:

GROUP OF GLUE POT, EDGE LOADING AND PRESSURE:

• Quick heating, teflon-coated pot for thermo-meltable glue, for an easy glue replacement
• Glue spreading roll with resistance in its inside to assure a constant glue temperature
• Control of the temperature of the applied glue, integrated in the PLC
• Device for the automatic recovery of the not used glue
• Automatic loader for edges in rolls with shears for edges up to 3 mm. of thickness
• Turning roll-holder diam. 730 mm.
• Pressure roll-way composed by nr. 2 steel rolls with opposed taper
• Automatic reduction of glue pot temperature after a temporary unuse (stand-by)

FACING GROUP 

With high frequency motor for 90-degree cut of the front and back exceeding edge.

TRIMMING GROUP:

With high frequency motors and equipped with frontal and vertical pad copying devices with polished and chromed surfaces, to align tools perfectly to the working point.

The group is equipped with combined milling cutters diam. 55,3 mm.: a part of the cutting edge is used to trim radial edges (2 mm. or 3 mm. on request) and thin beveled edges.

The straight part of the cutting edge is used for trimming wooden edges up to 5 mm. of thickness.

In order to pass from the position of radial edge to that one of wooden edge, it's enough to move milling cutters axially.

The thickness of the work-edge is setup through 2 numerical indicators. The group has independent suction of remaining chips.

Technical details:

Glue pot group:

Motor power 0.18 kW

Working temperature 20 ÷ 190 °C

Glue capacity ~ 0,8 kg

 Facing group:

Motor power 0,19 kW

Facing blade diam. 125 mm. Z20

Blade rotation speed 12.000 r.p.m.

 Trimming group:

Lower and upper motor power (kW) 2 x 0,35

Milling cutter rotation speed 12.000 r.p.m.

Widia milling cutters D.55,3 Z3

 Brush group (optional):

Motor power (n.2) 0,14 kW

Brush rotation speed 2800 r.p.m.

NOTES:

The machine has 2 free spaces for the installation of the following optional groups:

(1) = Edge scraping unit or Glue scraping unit

(½) = Glue scraping unit or Brushes

Attention! It isn't possible to install at the same time 2 glue-scraping groups

ADVANTAGES

Panel movement system: designed for a perfect finish.
The very best finishing of the panel edge is also guaranteed by the panel conveying track (exclusive solution), which prevents the panel having the feed affected by the typical pulses generated by the pinion of a traditional feed track and ensures a smooth and linear panel movement.

Gluing unit: superior performance when applying all solid wood edges.
It allows to apply all edges on panels with height from 8 to 50 mm: a real record in its category!

High frequency motors: maximum reliability and precision.
These motors provide an optimal finishing level of the applied edge. Also, the absence of belts or other conventional driving systems prevents any vibration, making the units reliable and with high precision overtime.

Exhaust outlets dedicated to: operating units for an optimal finish, glue pot unit for the best cleaning.

Exceptional access to all the operating units with the effective and noiseless protection hood.

Precision and easy-of-use: a single handwheel with a numerical readout raises and lowers the pressure beam allowing the automatic positioning of the operating units according to the panel thickness.