SLINDING TABLE SAW K4 PERFORM

The HAMMER K4 offers electric scoring unit, 1250 mm cutting width on the rip side, up to 3200 mm cutting length and 1290 mm outrigger table as part of its standard specification. This is more than sufficient for the processing of large panels.

More details

K4 PERFORM HAMMER
New machinery
 
Technical description

SLINDING TABLE SAW K4 PERFORM HAMMER

TECHNICAL DETAILS

  • Saw blade tilt 90°–45°
  • Cutting length 3200 mm
  • Cutting width continuously adjustable 0–1250 mm
  • Cutting height 103 mm
  • Solid cast iron tables and units
  • Crosscut fence 2600 mm
  • Crosscut fence 2600 mm for outrigger 1250
  • Professional for rip fence with round bar guide

STANDARD EQUIPMENT

Electrics

  • 3x 400 V motor voltage
  • 50 Hz motor frequency
  • Motor 5.5 HP (4.0 kW) S6/40% 

Saw Unit

  • Main sawblade dia. 250–315 mm, Saw unit speed 4800 rpm     
  • Saw blade tilting from 90°–45°, Max. cutting height 103 mm     
  • Saw-spindle moulder table in mm  830 x 430 mm
  • Rip capacity continuously adjustable 1250 mm
  • Scoring unit, Motor 1.0 HP (0.65 kW)    

Anodised Format Sliding Table

  • Format sliding table 3200 mm, cutting length 3200 mm with edging shoe*        

Outrigger Tables and Crosscut Fences

  • Outrigger table 1290     
  • Crosscut fence 2600 mm for outrigger 1290      

Weight

  • Weight, kg (with average equipment) net/gros 550/620 kg

Completely manufactured from cast iron, the HAMMER K4 saw aggregate offers a new dimension of efficiency and smoothness.

  • 104 mm cutting height with a 315 mm saw blade
  • Operates with dado tooling up to 19.5 mm in width
  • Zero point tilt
  • Oversized saw arbor with double bearing trunnions
  • Maximum energy transfer from the Poly-V belt ­
  • Optimal extraction with a completely enclosed, below table extraction system
  • Precise height adjustment via precision linear guides
  • High precision double-sided trunnion support system
  • Tilt segment “Easy-Glide”:

o    High durability

o    Play-free tilt

o    Unaffected by dust

o    Completely maintenance free

o    No lubrication required

Saw blade tilt 90°–45°

The blade can be tilted to any position between 90° and 45° and guarantees precise mitre cuts. End stops at the 90° and 45° position ensure the exact positioning of the settings, a large dimensioned scale makes the exact setting and reading of the value easy.

Scoring unit

Sensational: An electric scoring unit as standard

 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

11 products in the same category: