HORIZONTAL BEAM SAW KAPPA AUTOMATIC 100 43.43

Motor power 12 HP, cutting height of 100 mm, cutting length 4300 mm, continuously adjustable feed 5-100 m/min, return speed 130 m/min, main saw blade Ø 355 mm, scoring unit Ø 150 mm

More details

AUTOMATIC 100 43.43 FORMAT-4
New machinery
 
Technical description

HORIZONTAL BEAM SAW KAPPA AUTOMATIC 100 43.43 FORMAT-4: this horizontal panel saw with its construction and standard configuration, the largest saw from the kappa automatic series, meets the requirements of the most important factors of modern production: 

  • The automatic cutting height adjustment for the optimum saw blade entry angle and maximum saw carriage movement smoothness ensures a high-end edge finish.
  • The dual measuring system guarantees maximum repeatability.
  • The pressure bar opens in relation to the height of the material, reducing the time required to move the material and hence ensuring maximum productivity and the shortest cutting cycles.
  • An ever increasing factor in production are the energy costs. Our "Green Line package" with its controlled extraction gates and direct control of the motors can reduce energy consumption by up to 30%.
  • One of the lowest operating noise levels, helps the environment and protects the health of the operator.

STANDARD EQUIPMENT

Electrics

  • 3x 400 V motor voltage, 50 Hz motor frequency
  • Motor power 12.0 HP (9.0 KW)

Cutting length and pressure beam

  • Cutting length 4300 mm (Material sliders 4300 mm)
  • Pressure bars opens in relation to the height of the material
  • Pressure bars with controlled extraction gates
  • 2 pressure settings via the controls

Saw carriage

  • Cutting direction towards the fence
  • Continuously adjustable feed rate (5–100 m/min)
  • Return speed 130 m/min
  • Cutting length controlled automatically by laser sensor on saw carriage
  • Electronic, continuously adjustable cutting height (including groove function)
  • 2.2 kW scoring unit with pneumatic lowering
  • Main saw blade Ø 355 mm, 100 mm saw blade projection
  • 2 cutting height adjustment settings, manual (40 mm/100 mm)
  • Scoring unit Ø 150 mm
  • Saw blade quick-lock (main saw + scoring unit)

Work piece tables

  • Machine table in polished steel
  • Left hand table providing the right angle with air-cushion, 2300 x 600 mm
  • 2000 mm right angle fence
  • 3 work piece tables 2300 x 600 mm
  • Slide-in infill tables between air cushion tables

Material slider and stack clamp

  • Material slider working range in mm 4300
  • Number of roller tracks as a support behind the machine table 11
  • Number of panel clamps equipped with 2 fingers, opening height 80 mm 7
  • Material slider (forward/backward motion) 25/80 m/min
  • Automatic start from preset trimming position detected by laser sensor behind the machine table
  • Automatic pressure device (50–1200 mm)

Machine control

  • Electonic control with a 24” TFT-screen
  • PC with Windows 7 Professional operating system
  • Operating hours counter, running meter, service intervals
 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

5 products in the same category: