EDGE BANDER WITH GLUE BOX K40 PM

 The K40PM edge bander machine allows gluing panels from 8 to 50 mm thickness. The feed speed is 9 meters per minute, and the edge thickness allowed is up to 3 mm.

More details

K40 PM CASADEI INDUSTRIA
New machinery
 
Technical description

EDGE BANDER WITH GLUE BOX K40 PM CASADEI INDUSTRIA

The standard equipment on the Automatic Edgebander K40 PM forsees:

  • Teflon coated glue pot, controlled by PLC
  • Oscillating end trim guillotine, which beyond cutting, automatically through feeds the edge (PATENTED). Controlled by PLC.
  • MOTORIZED adjustable pressure rollers unit
  • Circular saw end trim unit with follow-up system and high frequency motor, controlled by PLC.
  • A flush trimming unit with high frequency motors and copying discs to flush trim the top/bottom radius or bevelled excess edge

The cutting shears from coil (PATENTED) allows to edge a very reduced panel at its minimum.

The Teflon coated glue pot is contolled by a PLC and its glue spreader roller is automatically activated when working temperature has been reached.

The glue pot installed on the Automatic Edgebander K40 is equipped with a heating element inside the glue spreader roller to guarantee high bonding levels.

The built-in PLC visualizes machine data:

  • Glue temperature
  • Metres of edge used
  • Working hours
  • Maintenance messages (visualized in regards to working hours)

TECHNICAL DETAILS

  • Panel height min-max: min 8 - max 50 mm
  • Edge thickness: 0,4 - 3 mm (coil) / 0,4 - 3 mm (strips)
  • Panel width: min. 95 mm
  • Panel length: min. 110 mm
  • Panel feed speed: 9 m/1'
  • Inlet rectifications (pre-milling) with diamond milling cutters D. 60 h 52 mm with 2 suction hoses D. 80
  • Inlet rectifications (pre-milling) with diamond milling cutters D. 60 h 52 mm with 2 suction hoses D. 80

- Inlet guide with micrometric adjustment - Chips removal 0 ÷ 2,0 mm

- HF motors 2 x 0,75 kW 12000 r.p.m.

- Max milling adjustment 2 mm with panel height 8-30 mm

- Max milling adjustment 1 mm with panel height 31-45 mm

  • Heating elements (glue pot unit): 1315 W - nr. 6 cartridges
  • End trimming motor: 200 Hz - 12.000 RPM - 0,22 KW
  • Flush trimming motors (each): 200 Hz - 12.000 RPM - 0,50 KW
  • Cutterheads - TCT combined WIDIA cutters (bevelled/radius): ø 75 mm Z4 - hole ø 16 mm (r=2 mm - 1,5°)
  • Total power installed: ca. 5 KW
  • Panel thickness: min 8 – max 50 mm
  • Appliable edges up to 3 mm of thickness in bobbin or strip  (manual inserting) on panels of max height 50 mm
  • Appliable edges up to 4 mm of thickness in strip  (manual inserting) on panels of max height 30 mm
  • Logic operation controlled by PLC : Glue thermo-regulator with automatic stand-by, Display with different messages for use and maintenance of the machine
  • Chain panel feeding (track) with rubber-coated sliding blocks
  • Feeding speed 9 mt/1’ 
  • Upper bar with double row of rubber-coated wheels - adjustable in height - with numerical indicator
  • New - Edge feeding through shears for bobbin cutting (Patented
  • Pneumatic shears for bobbin cutting up to 3 mm 
  • New Teflon-coated glue pot, electric resistances: 4 in the pot, 1 in the turrett and 1 in the spreading roll, spreading roll motorization 
  • New 2 pressure rolls: 1st motorized great diamete– 2nd in rubber
  • Automatic 1-motor front and back butting unit (straight cut) with copying devices and chips suction
  • Butting unit motor Kw 0,22 – 200 Hz -12.000 r.p.m.
  • Trimming units with milling cutters Z4 D. 75 mm, Widia plates with combined profile: straight/ray 2 mm/3° bevel (ray 3 mm on request)
  • Trimming units with wheel vertical copying device D.120 mm and sliding frontal copying device
  • Trimming unit motors Kw 0,50 - 200 Hz – 12.000 r.p.m.
  • Extendible frontal support with rolls for great panels
  • Roll bobbin support (cross) D. 800 mm
  • Openable back enclosure with suction collector D. 120 mm (3 ways D. 60 mm)
  • Weight Kg. 520 
  • Standard voltage: Volt 400 / 3-phase / 50 HZ / Volt 220/ 3-phase / 50 HZ

ADVANTAGES

  • Extremely compact and functional
  • Rubber chain feeder with three phase motor
  • Easy access to units
  • Ergonomic position of PLC for the operator
  • Minimum panel width 95 mm
  • Minimum panel length 110 mm
  • Perfect bonding
  • Possibility to edge wooden strips
  • Possibility to edge plastic laminated strips
  • Ready to use in a few minutes
  • Easy cleaning and maintenance
  • Quick edge changing
  • Quick adjustments in regards to edge used

OPTIONALS

  • Packing by crate
  • Packing in seaworthy case
  • Infrared lamp for panel pre-heating after pre-milling
  • Edge-scraping group R2 mm (R3 mm on request) with wheel vertical copying device and sliding copying device
  • Glue-scraping group with wheel vertical copying device
  • Brush group
  • Rounding device CRH, ideal complementary machine



 
K40 PM CASADEI INDUSTRIA VIDEO
 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

16 products in the same category: