EDGE BANDER WITH GLUE BOX K330 CASADEI INDUSTRIA
The Automatic Edgebander K330, top machine of the range with glue pot and toothed panel feed belt has a rich quantity of units. It has been in production since 1996 and is still going.
The Teflon coated glue pot is contolled by a PLC and its glue spreader roller is automatically activated when working temperature has been reached.
The glue pot installed on the Automatic Edgebander K330 is equipped with a heating element inside the glue spreader roller to guarantee high bonding levels.
The built-in PLC visualizes machine data:
- Glue temperature
- Metres of edge used
- Working hours
- Maintenance messages (visualized in regards to working hours)
The standard equipment on the Automatic Edge bander K330 forsees:
- Teflon coated glue pot controlled by a PLC
- Pneumatic Edge cutting shears from coil, beyond cutting, through feeds automatically the edge (PATENTED)
- MOTORIZED pressure rollers unit
- End trim unit with double circular saw blades and follow-up system
The cutting shears from coil (PATENTED) allows to edge a very reduced panel at its minimum.
- It can apply edges up to 3 mm. thick in bobbin - up tp 4 mm in strip (manual insertion)
- Automatic belt feeding for panel feeding
- Numerical indicator of panel thickness
- Adjustable infeed guide (for edge thickness compensation)
- Edge feeding by panel feeding
- Pneumatic shears for bobbin cutting with exclusion
- Teflon coated glue pot, 5 electric resistences and spreading roll motorization
- 2 pression rolls: the 1st one of great diamteter, floating – the 2nd one, chromed
- Front/rear, hooking/run automatic pneumatic butting device (shears)
- (lower/upper) trimming devices 10.000 r.p.m. with Widia cutters - 15-degree/ray mm. 2 (ray mm. 3 on request) - bevel - with slide copying devices and numerical indicators
- Working table mm. 2000 with adjustable rollers and polizene sliding guides
- Centralized suction unit diam. 120 mm.
- Extendable frontal support for large panels
- Roll bobbin support diam. 800 mm.
- Integral protection carter
- Openable rear closing with suction unit diam.120 mm. (3 ways diam. 60 mm.)
- E.C. marking
- Weight 310 kg.
- Standard voltage: Volt 400 / 3-phase / 50 Hz
- On request: Volt 220 / 3-phase / 50 Hz
- (upper and lower) bearing copying/trimming devices
- (upper and lower) wheel D.120 copying/trimming devices
- Glue scraping group (in alternative to the brush group)
- Brush group (in alternative to the glue scraping group)
- Warmable inlet guide
- Seaworthy packing
- Packing in crate
- Single-phase motors
- Deplacement wheels
- Rounding unit CRH, ideal complementary machine