EDGE BANDER WITH GLUE BOX K321

The K321 edge bander machine allows gluing, profiling and trimming of panels from 10 to 45 mm and edges up to a 2 mm thickness. The feed speed is 7 meters per minute.

More details

K321 CASADEI INDUSTRIA
New machinery
 
Technical description

EDGE BANDER WITH GLUE BOX K321 CASADEI INDUSTRIA

The standard equipment forsees: Teflon coated glue pot controlled by a PLC, Pneumatic Edge cutting shears from coil, beyond cutting, through feeds automatically the edge (PATENTED), MOTORIZED pressure rollers unit, end trim unit with double circular saw blades and follow-up system   for  a clean and precise flush trim cut.

The cutting shears from coil of the Automatic Edgbander K321 (PATENTED) allows to edge a very reduced panel at its minimum.

The Teflon coated glue pot is contolled by a PLC and its glue spreader roller is automatically activated when working temperature has been reached.

 The glue pot installed on the Automatic Edgebander K321 is equipped with a heating element inside the glue spreader roller to guarantee high bonding levels.

 The built-in PLC visualizes machine data: glue temperature, metres of edge used, working hours, maintenance messages (periodically visualized in regards to working hours)

TECHNICAL DETAILS

  • Teflon coated glue pot, 4 electric heating elements aprox. 1400 W
  • Spreading roll motorization with 2 electric resistences aprox. 1400 W
  • 2 pression rolls: the 1st one of great diamteter, floating – the 2nd one, chromed
  • Edge thickness: min-max 0,4 - 2,0 mm
  • Panel feeder speed: 7 mt/1'
  • Flush trimming motor: 0,37 KW
  • Widia cutterblocks combined radius/bevel: 10.000 RPM - Ø 75 mm Z4 - radius 2 mm/bevel 15°
  • Total power installed: ca. 2 KW
  • It can apply edges up to 2 mm. thick
  • Automatic belt feeding for panel feeding
  • Edge feeding by panel feeding
  • Pneumatic shears for bobbin cutting
  • Working table mm. 1800 with adjustable rollers and polizene sliding guides
  • Centralized suction unit diam. 120 mm.
  • Extendable frontal support for large panels
  • Roll bobbin support diam. 600 mm.
  • Weight 240 kg.
  • Standard voltage: Volt 400 / 3-phase / 50 Hz
  • On request: Volt 220 / 3-phase / 50 Hz

OPTIONALS

  • Machine with single-phase motors
  • Upper and lower ball bearings trimming copying units
  • Upper and lower D.120 wheel trimming copying units
  • Deplacement wheels
  • Rounding unit CRH, ideal complementary machine

 
K321 CASADEI INDUSTRIA Video
 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

16 products in the same category: