PRE GLUED EDGE BANDER V320 2MM

This automatic edge banding of pre-glued edge allows a maximum panel height of 45 mm, and an edge thickness from 0.4 to 2mm. The feed speed is 5 meters per minute.

More details

V320 2MM CASADEI INDUSTRIA
New machinery
 
Technical description

PRE GLUED EDGE BANDER V320 2MM CASADEI INDUSTRIA

TECHNICAL FEATURES
- it can apply edges up to mm.2 thick
- belt automatic feeding device for panel feeding
- numerical indicator of panel thickness
- edge feeding by panel feeding
- pneumatic shears to cut bobbins
- Leister blowing device 3300 W
- temperature adjustment (20-500 degrees C)
- 3 pressure rolls (1 rubber-coated one + 2 nylon)
- front/back automatic/pneumatic hooking/run butting device (shears)
- (upper/lower) trimming device 10000 r.p.m. with combined milling cutters with 4 teeth/15-degree bevel - with slide copying units and numerical indicators
- working table mm. 1800 with adjustable rolls and polizene sliding guides
- extendable frontal support for large panels
- bobbin roll support diam. mm. 600
- E.C. marking
- weight kg. 236
- Standard voltage Volt 400 / 3-phase / 50 Hz
- on request: Volt. 220/ 3-phase / 50 Hz
TECHNICAL DATA
- min./max. panel thickness mm. 10-45
- max. edge thickness mm. 0,8
- min. width to be edged mm. 90
- temperature adjustment 0-500°C
- Leister blower power about 3000 W
- trimming unit motor 0,38 kW
- Widia milling cutters 10000 r.p.m. - diam. mm. 75 Z4 - ray mm. 2/bevel 15°
- total installed power about 4 kW
ACCESSORIES ON REQUEST
- Packing by crate
- Packing by seaworthy case
- Centralized suction unit D. 120 mm. (2 ways D. 60 mm.)
- Machine with single-phase motors – Voltage 220 / 50-60 Hz
- Deplacement wheels

 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

2 products in the same category: