PRE GLUED EDGE BANDER V320 1MM

This automatic edge banding of pre-glued edge allows a maximum panel height of 45 mm, and an edge thickness from 0.4 to 1mm. The feed speed is 5 meters per minute.

More details

V320 1MM CASADEI INDUSTRIA
New machinery
 
Technical description

PRE GLUED EDGE BANDER V320 1MM CASADEI INDUSTRIA

TECHNICAL FEATURES

- it can apply edges up to mm.1 thick

- belt automatic feeding device for panel feeding

- numerical indicator of panel thickness

- edge feeding by panel feeding

- pneumatic shears to cut bobbins

- Leister blowing device 3300 W

- temperature adjustment (20-500 degrees C)

- 3 pressure rolls (1 rubber-coated one + 2 nylon)

- front/back automatic/pneumatic hooking/run butting device (shears)

- (upper/lower) trimming device 10000 r.p.m. with combined milling cutters with 4 teeth/15-degree bevel - with slide copying units and numerical indicators

- working table mm. 1800 with adjustable rolls and polizene sliding guides

- extendable frontal support for large panels

- bobbin roll support diam. mm. 500

- E.C. marking

- weight kg. 236

- standard voltage Volt 400 / 3-phase / 50 Hz

- on request: Volt. 220/ 3-phase / 50 Hz

TECHNICAL DATA

- min./max. panel thickness mm. 10-45

- max. edge thickness mm. 1

- min. width to be edged mm. 90

- temperature adjustment 0-500°C

- Leister blower power about 3000 W

- trimming unit motor 0,38 kW

- Widia milling cutters 10000 r.p.m. - diam. mm. 75 Z4 - ray mm. 2/bevel 15°

- total installed power about 4 kW

ACCESSORIES ON REQUEST

- Packing by crate

- Packing by seaworthy case

- Centralized suction unit D. 120 mm. (2 ways D. 60 mm.)

- Machine with single-phase motors – Voltage 220 / 50-60 Hz

- Deplacement wheels

 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

2 products in the same category: