CNC WORKING CENTRE PROFIT H350 16.50

Working area X = 5000 mm, Y = 1580 mm, Z = 250 mm. 12 position linear changer on the left hand side. 12 vertical and 6 horizontal drilling and grooving saw blade

More details

PROFIT H350 16.50 FORMAT-4
New machinery
 
Technical description

CNC MACHINING CENTRE PROFIT H350 16.30 FORMAT-4: It is universal workshops in particular where 5 axes technology is becoming increasingly important. With just a few standard tools, a large as possible range of uses has to be covered, in order to keep the cost of investment in special units and milling tools as low as possible. The new profit H350 Format-4 CNC Machining Centre covers these requirements like no other and offers the most up-to-date 5 axes technology at a manageable investment level. The high performance main spindle guarantees excellent results at every angle regardless of the material. In conjunction with the 18 independent drilling spindles and integrated grooving saw aggregate, the profit H350 offers limitless processing possibilities and ensures shortest possible production cycles.

In the new, completely reengineered design, the CNC machining centres from Format-4 display dynamics, power and high end technology from the first glance. With the "everything from a single supplier" solutions from Format-4 the customer will receive a perfectly matched complete package for the highest of requirements.

TECHNICAL DETAILS

Working area:
X= 5000 mm
Y= 1580 mm
Z= 250 mm (Passage height from console height)

CNC machining centre with gantry design: The machine chassis of the Profit H350 is made from thick walled electrically welded shaped tubes.

Linear guides:

  • Y-axis guiding system:
    Positioning is carried out by recirculating ball bearings running along hardened and polished linear guides. The Y axis is positioned by a polished recirculating ball spindle.
  • Guiding system Z-axis:
    Positioning is carried out by recirculating ball bearings running along hardened and polished linear guides. The Z axis is positioned by a polished recirculating ball spindle.

Automatic central lubrication system: the lubrication is applied as and when required to the guide carriages of the X, Y and Z axis as well as the bearing spindles in Y and Z. Lubrication is carried out automatically after a preset time.

Secure workpiece support - precise results: The dual circuit vacuum console table with manual suction pod positioning prevents the inadvertent shifting of the suction pods as the workpiece is placed on them. Various different Format-4 vacuum pods can be used to secure every conceivable workpiece design quickly and reliably.

Positioning display of consoles and vacuum pods: the workpiece, consoles and vacuum pods are all displayed in the CNC board simultaneously. This guarantees, that the workpiece is securely positioned and that there can be no collision between the tool and vacuum pod. The exact position of the vacuum pods on the consoles is shown accurately using a laser.
Workpiece cylinder stops at “double zero point” (second fence row): Additional to the workpiece cylinder stops for the “standard-zero point” is the second fence row found in the front part on every work bed, particularly useful for processing large workpieces. (Available as an option with the H20)

Workpiece stops for veneered panels: In addition to the standard workpiece cylinder stops, there are additional stops specifically developed to machine veneered panels with projecting veneer or laminate.

Chip conveyor for waste pieces and residual chips and shavings: For the removal of offcuts and chips from the machine chassis. At the end of the conveyor belt they are separated and then extracted. The remaining pieces are collected in a container.

The main spindle: The powerful 5 axes spindle with 12 or optionally 15 kW motor guarantees excellent results whilst milling, drilling and sawing at any angle. The special liquid cooling and high quality ceramic bearings ensure durable precision and incredible smoothness regardless of the material. An inverter regulates the speed and can be set at any speed up to 24.000 rpm.

Limitless processing possibilities with the FORMAT-4 boring unit: The 18 (12 vertical and 6 horizontal) drilling spindles are independently controlled in both the X- and Y- direction. The integrated grooving saw aggregate with variable speed up to 6,000 rpm guarantees almost limitless processing variety and short production cycles.

Workpiece feeding rails: Loading supports assist in the simple loading and unloading of large or heavy workpieces. A major advantage is that they enable you to operate the Format-4 machining centre alone.
Reinforced loading supports with a higher load capacity are also available as an option.

Chipping deflection plate: A chip deflector mounted to the spindle controlled by the C-axis enables the unlimited use of existing tools. When machining the edge of a workpiece, dust and chips are directed into the extraction port.

Length measurement system: Setting the parametres of your tools made easy: every tool length is stored in the tool database accurately to one hundredth of a millimetre.

Variably positionable extraction hood: The extraction hood positions itself fully automatically to the workpiece height which significantly reduces the dust and noise emissions.

Panel activation: Specially designed for use with compressed air controlled frame clamp systems, this function offers new possibilities and enormous clamping strength when it comes to the processing of solid wood. The ability to be able to deactivate the consoles individually makes it possible to remove waste material without having to release the vacuum holding the workpiece. This ensures that the workpiece stays in exactly the right position for the next working process (inner profiles etc.).

12 position linear changer on the left hand side: The linear tool changer with 12 different tooling positions (including 1 aggregate) mounted on the left hand side of the machine offers unlimited machining diversity.

18 Position Rotary Tool Changer mounted to the outrigger:

Option: The rotating changer with 18 tool positions is mounted at the back of the outrigger and moves with the outrigger along the X-axis. The 18-position rotating tool changer, keeps tooling changing times to the bare minimum making the Format-4 machining centre even more efficient!

Tool position for a saw blade, mounted to the gantry.: Max. Saw ­blade ­diameter 350 mm
This ensures that no tool positions are blocked in the tool changers, because of the large diameter of the blade.

 
Ask for information

To request information about this product, you can do so in the following ways.

  +34 983 40 19 42
  +34 637 771 218

15 products in the same category: